VERTICAL HYDRAULIC SURFACE GRINDING MACHINE

	TECHNICAL SPECIFICATIONS	VSG 1800V	VSG 1500V	VSG 1300V
	MAX.AUTOMATIC TABLE TRAVERSE	1800 MM (71")	1500 MM (59”)	1300 MM (51”)
	HEAD VERTICAL TRAVERSE	900 MM (35.45')	720 MM (28.3”)	600 MM (24”)
	SEGMENT WHEEL DIA	450 MM (17.7")	400 MM (15.7”)	350 MM (14”)
	MAX. MILLING WIDTH	400 MM (15.75")	300 MM (14”)	300 MM (11.8”)
	MAX.GRINDING WIDTH	450 MM (17.7")	400 MM (15.7”)	350 MM (14”)
	MAX. GRINDING LENGTH	1500 MM (59")	1200 MM (47”)	1000 MM (41”)
	MIN./MAX.DISTANCE BETWEEN TABLE & SEGMENT WHEEL	0 - 900 MM (0 - 35.5")	0 - 720 MM (0-28.4”)	0 - 600 MM (0-24”)
	DISTANCE FROM COLUMN TO TABLE CENTER	396 MM (15.6")	350 MM (14”)	350 MM (14”)
	GRINDING SPINDLE ROTATION SPEED	900 RPM	1440 RPM	1440 RPM
	MILLING SPEED VARIABLE	80 - 600 MM	80 - 700 RPM	80 - 700 RPM
	MIN./MAX.TABLE FEED SPEED (STEPLESSLY VARIABLE)	0 - 4500 MM / MIN	0 - 4500 MM / MIN.	0 - 4500 MM / MIN.
	SPINDLE MOTOR	7.5 KW / 10 HP	5.5 KW / 7.5 HP	3.75 - 0.75 K.W / 5 -1 HP
	HEAD RAPID FEED MOTOR	0.44 KW servo motor	0.19 KW / 0.25 HP	0.19 KW / 0.25 HP
	HYDRAULIC SYSTEM MOTOR	1.1 KW / 1.5 HP	0.75 KW / 1 HP	0.75 KW / 1 HP
	COOLANT PUMP MOTOR	0.09 KW / 0.12 HP	0.09 KW / 0.12 HP	0.09 KW / 0.12 HP
	LENGTH OF MACHINE	4000 MM (157")	2600 MM (103”)	2480 MM (95”)
	WIDTH OF MACHINE	1300 MM (51")	1200 MM (47”)	1200 MM (47.25”)
	HEIGHT OF MACHINE	2250 MM (89")	2050 MM (81”)	1900 MM (75”)
	WORK SPACE REQUIRED (LXW)	5750 MM X 1600 MM	3800 X 1500 MM (122” X 59”)	3100 X 1500 MM (110” X 59”)
	WORK HEIGHT REQUIRED	2350 MM (93")	2150 MM (85")	2050 MM (81”)
	NET WEIGHT	3000 Kg ( APPROX )	1850 KG (APPROX.)	1500 KG (APPROX.)
	GROSS WEIGHT	3250 Kg ( APPROX )	2500 KG (APPROX.)	2420 KG (APPROX.)
	SHIPPING VOLUME	15 M3	9 M 3	8 M 3
	PACKING CASE OUTER SIZE (LXWXH)	4250 X 1500 X 2485 MM (114” X 55” X 93”)	2900 X 1400 X 2360MM (114” X 55” X 93”)	2650 X 1400 X 2205 MM (104” X 55” X 87”)

	STANDARD ACCESSORIES	VSG 1800V	VSG 1500V	VSG 1300V
	SETTING UP PARALLEL 135 HEIGHT	1 PAIR	1 PAIR	1 PAIR
	SEGMENT WHEEL	1 NO	1 NO	1 NO
	SEGMENT STONES	8 NOS	8 NOS	8 NOS
	T-BOLT WITH NUT AND WASHER	8 NOS	8 NOS	8 NOS
	BLOCK TIGHTENING CLAMP	4 NOS	4 NOS	4 NOS
	HEAD CLAMPING PLATE WITH STUDS	2 NOS	2 NOS	2 NOS
	WHEEL BALANCING SHAFT WITH NUT	1 NO	1 NO	1 NO
	GRINDING WHEEL DRESSER	1 SET	1 SET	1 SET
	COOLANT TANK WITH ELECTRIC PUMP	1 NO	1 NO	1 NO
	DOUBLE END SPANNER (24 – 26)	1 NO	1 NO	1 NO
	ALLANKEY SET (9 NOS)	1 SET	1 SET	1 SET
	LEVELLING PLATES WITH BOLTS	3 NOS	3 NOS	3 NOS
	FOUNDATION BOLT WITH NUTS	3 NOS	3 NOS	3 NOS
	MILLING TOOL DIA. 12MM	1 NO	1 NO	1 NO
	SEGMENT WHEEL PULLER	1 NO	1 NO	1 NO
	HANDLE TYPE ALLENKEY 4MM	1 NO	1 NO	1 NO
	DIALING ROD	1 NO	1 NO	1 NO
	OPERATING MANUAL	1 NO	1 NO	1 NO

	OPTIONAL ACCESSORIES
	HEAD CLAMPING DEVICE
	WHEEL BALANCER
	ROLL OVER FIXTURE
	SETTING UP PARALLEL 50MM HEIGHT
	SETTING UP PARALLEL 250MM HEIGHT
	UNIVERSAL HEAD CLAMPING FIXTURE
	FLY WHEEL & CLUTCH PLATE GRINDING ATTACHMENT